Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SNOLEN® EF 0.33/58 - (PE-HD) - JSC Gazprom neftekhim Salavat

Material Data Center offers the following functions for SNOLEN® EF 0.33/58:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Snolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトフローレート, MFI 0.28 g/10min ISO 1133
温度 190 °C -
荷重 5 kg -
機械的特性単位テスト基準
ISO データ
降伏応力 27 MPa ISO 527
破壊応力 35 MPa ISO 527
ショア硬さD 61 - ISO 7619-1
熱的特性単位テスト基準
ISO データ
ビカット軟化温度, B 75 °C ISO 306
その他の特性.単位テスト基準
密度. 956 kg/m³ ISO 1183
機械的特性(ィルム)単位テスト基準
ISO データ
破壊応力, 平行 45 MPa ISO 527-3
破壊応力, 直角 40 MPa ISO 527-3
最大ひずみ, 平行 400 % ISO 527-3
最大ひずみ, 直角 450 % ISO 527-3
特殊な特性
成形加工法.
フィルム押出成形., 熱成形.
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Low Gel
アプリケーション
パッケージング
領域別の利用可能性
ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.