Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Sarlink® 4175 - TPV - Teknor Apex Co.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Sarlink datasheets, application examples or technical articles are available in Material Data Center
SARLINK TPV 4100 series are engineered materials designed primarily for demanding automotive and industrial applications. Available in both black and natural, SARLINK 4175 is a low density, medium hardness thermoplastic vulcanizate that exhibits excellent compression set, flex fatigue, and high and low temperature performance. The material can be processed by injection molding, blow molding and extrusion for applications such as seals, gaskets, chemical resistant hose and tube, boots and bellows.
| Property | Value | Unit | Standard |
|---|---|---|---|
| Tensile properties (Cross Flow Direction) | ISO 37 | ||
| Tensile strength at break | 8,5 | MPa | |
| Modulus at 100% elongation | 3,3 | MPa | |
| Elongation at break | 590 | % | |
| Hot air aging (168h/150°C, Cross Flow Direction) | ISO 188 | ||
| Change in hardness | 3 | points | |
| Change in tensile strength at break | -9 | % | |
| Change in modulus at 100% elongation | 3 | % | |
| Change in elongation at break | -16 | % | |
| Hot air aging (1000h/135°C, Cross Flow Direction) | ISO 188 | ||
| Change in hardness | 2 | points | |
| Change in tensile strength at break | -2 | % | |
| Change in modulus at 100% elongation | 5 | % | |
| Change in elongation at break | -5 | % | |
| Volume swell (70h/125°C in IRM 903 oil) | 78 | % | ISO 1817 |
| Apparent shear viscosity @ 206 1/s, 200°C | 340 | Pa.s | ISO 11443 Capillary |
| 機械的特性 | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ISO データ | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 圧縮永久ひずみ 23℃, 24h | 22 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 圧縮永久ひずみ 70℃, 24h | 31 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ショア硬さA | 75 | - | ISO 7619-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Other Standards[S] | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 伸び率100%時の応力 | 5.3 | MPa | ISO 37 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 破壊応力 TPE | 7.2 | MPa | ISO 37 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 破壊ひずみ TPE | 300 | % | ISO 37 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| その他の特性. | 値 | 単位 | テスト基準 |
| 密度. | 960 | kg/m³ | ISO 1183 |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.