Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® HT CZM 30 BLACK TLD - PA*-GF30 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

PA11/10T,GF30,MHL,C16-090  

Rilsan® HT CZM 30 BLACK TLD is a polyphthalamide produced from a renewable source. This grade is glass fiber-reinforced, formulated and designed for injection molding for high-temperature applications.

The percentage of renewable carbon is 67% (calculated value, based on ASTM D6866).

Main applications:

• Automotive & transportation quick connector for flexible fuels and powertrain applications
• High-temperature injection molding

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	15 / *	cm³/10min	ISO 1133
温度	300 / *	°C	-
荷重	2.16 / *	kg	-

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	- / 8500	MPa	ISO 527
破壊応力	- / 130	MPa	ISO 527
破壊ひずみ	- / 4	%	ISO 527
シャルピー衝撃強さ, +23°C	- / 51	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	- / 46	kJ/m²	ISO 179/1eU
ショア硬さD	83 / *	-	ISO 7619-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	255 / *	°C	ISO 11357-1/-3
ガラス転移点, 10°C/min	75 / *	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	214 / *	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	236 / *	°C	ISO 75-1/-2

その他の特性.	乾燥/調湿	単位	テスト基準
吸水率	1.13 / *	%	Sim. to ISO 62
吸湿率	0.22 / *	%	Sim. to ISO 62
密度	1300 / -	kg/m³	ISO 1183
Biobased content	67	%	-

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット., 黒

添加剤.

離型剤.

特殊な特性.

光安定化., 紫外線安定化., 熱安定化.

Certifications

Contains renewable resources

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Processing conditions :
- Typical melt temperature (Min / Recommanded / Maxi) : 270°C  / 280°C / 320°C.
- Typical mold temperature : 90 - 110°C.
- Drying time and temperature (only for bags opened for more than two hours) : 4 - 8 hours / 100 - 110°C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.