Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Quantum Lytex 64690 - EP-CF50 - LyondellBasell Industries

Material Data Center offers the following functions for Quantum Lytex 64690:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Quantum datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Lytex 64690 BK is a chopped carbon fiber reinforced molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with zero VOC and a low density. The carbon fiber is standard modulus PAN based 12K tow.
機械的特性値単位テスト基準
ISO データ
引張弾性率 33000 MPa ISO 527
破壊応力 190 MPa ISO 527
シャルピー衝撃強さ, +23°C 80 kJ/m² ISO 179/1eU
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 200 °C ISO 75-1/-2
その他の特性.値単位テスト基準
密度. 1500 kg/m³ ISO 1183
特殊な特性
成形加工法.
Compression Molding
納入形状.
シート状成形材料, 黒
な特性
Fatigue Resistance, Low Emission
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.