Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 5533 SP 01 - TPA - ARKEMA

Material Data Center offers the following functions for Pebax® 5533 SP 01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Polyether block amide Pebax® 5533 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.


Main applications:
  • Athletic foot wear components
  • Ski shoes
  • High performance power trasmission belts


Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 1.2 / * % ISO 294-4, 2577
成形収縮率, 直角 1.4 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 170 / 165 MPa ISO 527
降伏応力 12 / 12 MPa ISO 527
降伏ひずみ 25 / 25 % ISO 527
破壊呼びひずみ >50 / >50 % ISO 527
伸び率10%時の応力 10 / * MPa ISO 527
伸び率100%時の応力 14 / * MPa ISO 527
破壊応力 TPE 52 / * MPa ISO 527
破壊ひずみ TPE >300 / * % ISO 527
圧縮永久ひずみ 23℃, 24h 43 / * % ISO 815
引裂強さ 106 / * kN/m ISO 34-1
耐摩耗性 47 / * mm³ ISO 4649
ショア硬さD 50 / * - ISO 7619-1
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 159 / * °C ISO 11357-1/-3
荷重たわみ温度, 0.45 MPa 66 / * °C ISO 75-1/-2
ビカット軟化温度, B 66 / * °C ISO 306
線膨張係数, 平行 170 / * E-6/K ISO 11359-1/-2
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 100Hz 9 / - - IEC 62631-2-1
比誘電率, 1MHz 5 / - - IEC 62631-2-1
誘電正接, 100Hz 1110 / - E-4 IEC 62631-2-1
誘電正接, 1MHz 1020 / - E-4 IEC 62631-2-1
体積抵抗率 3.2E11 / - Ohm*m IEC 62631-3-1
表面抵抗率 * / 3E12 Ohm IEC 62631-3-2
耐電圧 38.5 / - kV/mm IEC 60243-1
耐トラッキング性 * / 600 - IEC 60112
その他の特性.乾燥/調湿単位テスト基準
吸水率 1.2 / * % Sim. to ISO 62
吸湿率 0.6 / * % Sim. to ISO 62
密度 1010 / 1010 kg/m³ ISO 1183
機能
粘度せん断速度. , Pebax® 5533 SP 01, TPA, ARKEMA
せん断応力-せん断速度. , Pebax® 5533 SP 01, TPA, ARKEMA
応力-ひずみ. , Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
応力-ひずみ. , Pebax® 5533 SP 01 (調湿), TPA, ARKEMA
割線弾性率−ひずみ. , Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
割線弾性率−ひずみ. , Pebax® 5533 SP 01 (調湿), TPA, ARKEMA
応力-ひずみ (等時的). 23°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
クリープ弾性率−時間. 23°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
クリープ曲線 23°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
応力-ひずみ (等時的). 40°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
クリープ弾性率−時間. 40°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
クリープ曲線 40°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
応力-ひずみ (等時的). 60°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
クリープ弾性率−時間. 60°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
クリープ曲線 60°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
応力-ひずみ (等時的). 80°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
クリープ弾性率−時間. 80°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
クリープ曲線 80°C, Pebax® 5533 SP 01 (乾燥), TPA, ARKEMA
pvT , Pebax® 5533 SP 01, TPA, ARKEMA
特殊な特性
成形加工法.
射出成形., フィルム押出成形., 異形押出成形., その他の押出成形., トランスファー成形., 注型., 熱成形.
納入形状.
ペレット.
特殊な特性.
メッキ性., 光安定化., 紫外線安定化., 熱安定化.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 200°C / 240°C / 270°C.
- Typical mold temperature : 25 – 60°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.
その他の押出成形.

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C
耐薬品性
酸
38wt％硫酸 (23ﾟC)
塩基
1wt％水酸化ナトリウム (23ﾟC)
アルコール
エタノール　23℃ (23ﾟC)
炭化水素
イソオクタン (23ﾟC)
ケトン系溶剤
アセトン (23ﾟC)
食塩水
50wt％ジンクロメート (23ﾟC)
その他
水 (23ﾟC)
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.