Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX973 - Europe - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

NORYL GTX™ 973 resin is a conductive, non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade is optimized to allow for in- or on-line primer-less electrostatic and powder coat painting. NORYL GTX973 resin exhibits high impact resistance and strength and is an excellent candidate for automotive painted applications such as body panels, fenders, and tank flaps.

UL Yellow Card Link E45329-269624

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	12	cm³/10min	ISO 1133
温度	280	°C	-
荷重	5	kg	-
溶融時の密度	945	kg/m³	-
溶融時の熱伝導率	0.22	W/(m K)	-
溶融時の比熱	2610	J/(kg K)	-
突き出し時の時の温度	240	°C	-
ASTM数据
メルトフローレイト, MFI	20	g/10min	ASTM D 1238
温度	280	°C	-
荷重	5	kg	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	2300	MPa	ISO 527
降伏応力	60	MPa	ISO 527
降伏ひずみ	4	%	ISO 527
破壊応力	55	MPa	ISO 527
破壊ひずみ	30	%	ISO 527
曲げ弾性率	2300	MPa	ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C	15	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC	6	kJ/m²	ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm	15	kJ/m²	ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm	7	kJ/m²	ISO 180/1A
ASTM数据
引張弾性率	2200	MPa	ASTM D 638
降伏応力	60	MPa	ASTM D 638
破壊応力	55	MPa	ASTM D 638
降伏点伸び	5	%	ASTM D 638
破断伸び	55	%	ASTM D 638
曲げ弾性率	2300	MPa	ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in	130	J/m	ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature	80	J/m	ASTM D 256
温度	-30	°C	-

熱的特性	値	単位	テスト基準
ISO データ
ビカット軟化温度, B	195	°C	ISO 306
ビカット軟化温度, 120°C/h 50N	200	°C	ISO 306
線膨張係数, 平行	90	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	90	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	1.5	mm	-
グローワイヤ燃焼性指数 (GWFI)	675	°C	IEC 60695-2-12
グローワイヤ燃焼性指数 (GWFI)	675	°C	IEC 60695-2-12
グローワイヤ着火温度 (GWIT)	675	°C	IEC 60695-2-13
GWIT - 試験片の厚さ	2	mm	-
グローワイヤ着火温度 (GWIT)	675	°C	IEC 60695-2-13
GWIT - 試験片の厚さ	3	mm	-
ASTM数据
DTUL @ 66 psi	195	°C	ASTM D 648
ビカット軟化温度	200	°C	ASTM D 1525

その他の特性.	値	単位	テスト基準
吸水率.	4.2	%	Sim. to ISO 62
吸湿率	1.2	%	Sim. to ISO 62
密度.	1100	kg/m³	ISO 1183
密度	1090	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	100 - 120	°C	-
Pre-drying - Time	2 - 3	h	-
Processing humidity	≤0.07	%	-
樹脂温度	290 - 320	°C	-
金型温度	100 - 120	°C	-
Feed temperature	60 - 80	°C	-
Zone 1	260 - 280	°C	-
Zone 2	280 - 300	°C	-
Zone 3	290 - 320	°C	-

機能

特殊な特性

成形加工法.

射出成形.

アプリケーション

自動車

領域別の利用可能性

ヨーロッパ.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.