Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX964W - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX964W:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL GTX™ 964W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA) that exhibits very high impact resistance and high flow. This injection moldable grade was designed for large parts, such as automotive body panels, thin wall applications, and structural members for energy absorption.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 7 cm³/10min ISO 1133
温度 280 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
降伏応力 50 MPa ISO 527
降伏ひずみ 4 % ISO 527
破壊応力 45 MPa ISO 527
破壊ひずみ 50 % ISO 527
曲げ弾性率 1800 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 45 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 20 kJ/m² ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 50 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm 20 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ, +23°C 50 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 20 kJ/m² ISO 180/1A
温度 -30 °C -
ASTM数据
降伏応力 44 MPa ASTM D 638
破断伸び 56 % ASTM D 638
曲げ弾性率 1830 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 528 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 0.45 MPa 175 °C ISO 75-1/-2
ビカット軟化温度, A 240 °C ISO 306
ビカット軟化温度, B 175 °C ISO 306
ビカット軟化温度, 120°C/h 50N 180 °C ISO 306
ASTM数据
DTUL @ 66 psi 185 °C ASTM D 648
熱伝導率, ソリッド 0.0332 W/(m K) ASTM C 177
その他の特性.値単位テスト基準
吸水率, 平衡 1.19 % ASTM D 570
密度 1080 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 95 - 105 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.07 % -
樹脂温度 295 - 315 °C -
金型温度 75 - 120 °C -
Zone 1 275 - 315 °C -
Zone 2 280 - 315 °C -
Zone 3 290 - 315 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 1.4 MPa -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
高耐衝撃及び耐衝撃改良.
アプリケーション
自動車
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.