Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX902 - Americas - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX902 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL GTX™ 902 resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits excellent chemical resistance and excellent paintability. NORYL GTX902 resin is an excellent candidate for automotive wheel cover applications.

UL Yellow Card Link E121562-220764
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 12 cm³/10min ISO 1133
温度 280 °C -
荷重 5 kg -
成形収縮率, 平行 1.0 % ISO 294-4, 2577
成形収縮率, 直角 1.1 % ISO 294-4, 2577
ASTM数据
メルトフローレイト, MFI 3.4 g/10min ASTM D 1238
温度 280 °C -
荷重 2.16 kg -
成形収縮率., 平行 1.03 mm/mm ASTM D 955
成形収縮率, 直角 1.12 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 2150 MPa ISO 527
降伏応力 58 MPa ISO 527
降伏ひずみ 9.2 % ISO 527
破壊応力 54 MPa ISO 527
破壊ひずみ 46 % ISO 527
曲げ弾性率 2230 MPa ISO 178
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 19 kJ/m² ISO 179/1eA
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 18 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 2173 MPa ASTM D 638
降伏応力 56 MPa ASTM D 638
破壊応力 52 MPa ASTM D 638
降伏点伸び 12 % ASTM D 638
破断伸び 38 % ASTM D 638
曲げ弾性率 2120 MPa ASTM D 790
ロックウェル硬度 R 118 - ASTM D 785
Taber耐摩耗性 19 mg/1000 cycles ASTM D 1044
ノッチ付きIzod衝撃強さ, 1/8 in 167 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 53 J/m ASTM D 256
温度 -40 °C -
アイゾット衝撃試験, 1/8 in N J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 113 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 154 °C ISO 75-1/-2
ビカット軟化温度, A 235 °C ISO 306
ビカット軟化温度, B 166 °C ISO 306
線膨張係数, 平行 93 E-6/K ISO 11359-1/-2
線膨張係数, 直角 93 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.5 mm -
ASTM数据
DTUL @ 66 psi 155 °C ASTM D 648
DTUL @ 264 psi 120 °C ASTM D 648
ビカット軟化温度 167 °C ASTM D 1525
その他の特性.値単位テスト基準
吸水率. 2.02 % Sim. to ISO 62
密度. 1090 kg/m³ ISO 1183
密度 1080 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 95 - 105 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.07 % -
樹脂温度 275 - 300 °C -
金型温度 65 - 95 °C -
Zone 1 260 - 300 °C -
Zone 2 265 - 300 °C -
Zone 3 270 - 300 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 1.4 MPa -
特殊な特性
成形加工法.
射出成形.
アプリケーション
自動車
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.