Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin PX9406K - Asia - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin PX9406K - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL PX9406K resin may be suitable for consumer electronics applications. Flame retardant used is non-halogenated. UL94 V0 at 1.5 mm, 5VB at 2 mm, and 5VA at 2.5 mm. RTI (impact) = 105 C

UL Yellow Card Link E207780-101401128
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 11 cm³/10min ISO 1133
温度 280 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2550 MPa ISO 527
降伏応力 67 MPa ISO 527
降伏ひずみ 5 % ISO 527
破壊応力 52 MPa ISO 527
破壊ひずみ 50 % ISO 527
曲げ弾性率 2420 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 13 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 5 kJ/m² ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 12 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm 5 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 2700 MPa ASTM D 638
降伏応力 66 MPa ASTM D 638
破壊応力 50 MPa ASTM D 638
降伏点伸び 5.7 % ASTM D 638
破断伸び 45 % ASTM D 638
曲げ弾性率 2650 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 170 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 100 J/m ASTM D 256
温度 -30 °C -
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 111 °C ISO 75-1/-2
ビカット軟化温度, 120°C/h 10N 144 °C ISO 306
ビカット軟化温度, 120°C/h 50N 134 °C ISO 306
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
厚さhでの燃焼性 5V 5VB class IEC 60695-11-20
試験片の厚さ 2.0 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
グローワイヤ着火温度 (GWIT) 800 °C IEC 60695-2-13
GWIT - 試験片の厚さ 2 mm -
グローワイヤ着火温度 (GWIT) 800 °C IEC 60695-2-13
GWIT - 試験片の厚さ 3 mm -
ASTM数据
DTUL @ 66 psi 128 °C ASTM D 648
DTUL @ 264 psi 113 °C ASTM D 648
電気的特性.値単位テスト基準
ISO データ
耐トラッキング性 250 - IEC 60112
ASTM数据
体積抵抗率 >1E15 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
密度. 1100 kg/m³ ISO 1183
密度 1100 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 105 - 110 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 275 - 305 °C -
金型温度 70 - 100 °C -
Zone 1 245 - 295 °C -
Zone 2 255 - 300 °C -
Zone 3 265 - 305 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
添加剤.
難燃剤.
特殊な特性.
難燃.
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.