Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin PX1860 - Europe - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

NORYL PX1860 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and high flow , this resin also uses non-chlorinated, non-brominated FR additives to achieve a V1 UL94 rating at 1.5 mm with a specific density of 1.1 g/cm^3. NORYL PX1860 may be an excellent material candidate for Flat Panel TV enclosure applications requiring good rheological properties, heat resistance, hydrolysis resistance, low density and thin wall flame resistance.

UL Yellow Card Link E45329-100037005

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	34	cm³/10min	ISO 1133
温度	280	°C	-
荷重	2.16	kg	-
溶融時の密度	975	kg/m³	-
溶融時の熱伝導率	0.17	W/(m K)	-
溶融時の比熱	1910	J/(kg K)	-
突き出し時の時の温度	93	°C	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	2510	MPa	ISO 527
降伏応力	61	MPa	ISO 527
降伏ひずみ	3.5	%	ISO 527
破壊応力	53	MPa	ISO 527
破壊ひずみ	8	%	ISO 527
曲げ弾性率	2420	MPa	ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C	6	kJ/m²	ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm	6	kJ/m²	ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm	4	kJ/m²	ISO 180/1A
ASTM数据
引張弾性率	3140	MPa	ASTM D 638
降伏応力	52	MPa	ASTM D 638
破壊応力	49	MPa	ASTM D 638
降伏点伸び	3.6	%	ASTM D 638
破断伸び	7.3	%	ASTM D 638
曲げ弾性率	2770	MPa	ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in	38	J/m	ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature	27	J/m	ASTM D 256
温度	-30	°C	-

熱的特性	値	単位	テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa	92	°C	ISO 75-1/-2
ビカット軟化温度, B	111	°C	ISO 306
ビカット軟化温度, 120°C/h 50N	114	°C	ISO 306
線膨張係数, 平行	85.2	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	85.8	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	V-1	class	IEC 60695-11-10
試験片の厚さ	1.5	mm	-
グローワイヤ燃焼性指数 (GWFI)	960	°C	IEC 60695-2-12
GWFI - 試験片の厚さ	3	mm	-
ASTM数据
DTUL @ 264 psi	90	°C	ASTM D 648
ビカット軟化温度	110	°C	ASTM D 1525

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 1MHz	2.7	-	IEC 62631-2-1
誘電正接, 1MHz	200	E-4	IEC 62631-2-1
体積抵抗率	>1E13	Ohm*m	IEC 62631-3-1
表面抵抗率	1E14	Ohm	IEC 62631-3-2
耐トラッキング性	250	-	IEC 60112
ASTM数据
誘電正接, 1 MHz	0.02	-	ASTM D 150
比誘電率, 1 MHz	2.7	-	ASTM D 150
表面抵抗率	1E14	Ohm	ASTM D 257
体積抵抗率	>1E15	Ohm*cm	ASTM D 257

その他の特性.	値	単位	テスト基準
吸水率.	0.13	%	Sim. to ISO 62
吸湿率	0.02	%	Sim. to ISO 62
密度.	1100	kg/m³	ISO 1183
密度	1100	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	70 - 80	°C	-
Pre-drying - Time	2 - 3	h	-
樹脂温度	260 - 295	°C	-
金型温度	45 - 70	°C	-
Feed temperature	65 - 85	°C	-
Zone 1	210 - 230	°C	-
Zone 2	240 - 270	°C	-
Zone 3	260 - 295	°C	-

機能

特殊な特性

成形加工法.

射出成形.

領域別の利用可能性

ヨーロッパ.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.