Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NH8006 Europe - (PPE+PS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin NH8006 Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL NH8006 resin is a 30% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable and extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA and V0 at 2mm along with a UL746C Outdoor Suitability rating of F1. NORYL NH8006 resin offers an exceptional balance of strength and dimensional stability and is an excellent candidate for electrical and electronic applications.
UL Yellow Card E45329-100051184
UL Yellow Card E45329-100100471
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 6 cm³/10min ISO 1133
温度 280 °C -
荷重 10 kg -
ASTM数据
メルトフローレイト, MFI 2.1 g/10min ASTM D 1238
温度 280 °C -
荷重 5 kg -
成形収縮率., 平行 0.00225 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 9000 MPa ISO 527
降伏応力 125 MPa ISO 527
降伏ひずみ 1.8 % ISO 527
破壊応力 125 MPa ISO 527
破壊ひずみ 1.8 % ISO 527
曲げ弾性率, 23°C 8000 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 9 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C 26 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 8 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 8 kJ/m² ISO 180/1A
温度 -30 °C -
ASTM数据
引張弾性率 9500 MPa ASTM D 638
降伏応力 125 MPa ASTM D 638
破壊応力 125 MPa ASTM D 638
降伏点伸び 2 % ASTM D 638
破断伸び 2 % ASTM D 638
曲げ弾性率 8600 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 85 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 75 J/m ASTM D 256
温度 -30 °C -
アイゾット衝撃試験, 1/8 in 500 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 149 °C ISO 75-1/-2
ビカット軟化温度, B 156 °C ISO 306
線膨張係数, 平行 37 E-6/K ISO 11359-1/-2
線膨張係数, 直角 55 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 V-1 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 2.0 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 5V 5VA class IEC 60695-11-20
試験片の厚さ 2.0 mm -
Yellow Card 可用 はい - -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 3.2 mm -
ASTM数据
線膨張係数, 平行 37 E-6/K ASTM D 696
線膨張係数, 直角 55 E-6/K ASTM D 696
DTUL @ 264 psi 149 °C ASTM D 648
ビカット軟化温度 156 °C ASTM D 1525
電気的特性.値単位テスト基準
ISO データ
比誘電率, 1MHz 3.1 - IEC 62631-2-1
誘電正接, 1MHz 40 E-4 IEC 62631-2-1
表面抵抗率 5E17 Ohm IEC 62631-3-2
耐電圧 16 kV/mm IEC 60243-1
耐トラッキング性 212 - IEC 60112
ASTM数据
誘電正接, 1 MHz 0.004 - ASTM D 150
比誘電率, 1 MHz 3.11 - ASTM D 150
表面抵抗率 4E17 Ohm ASTM D 257
その他の特性.値単位テスト基準
吸水率. 0.23 % Sim. to ISO 62
吸湿率 0.07 % Sim. to ISO 62
密度. 1340 kg/m³ ISO 1183
密度 1330 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 110 - 120 °C -
Pre-drying - Time 2 - 3 h -
樹脂温度 300 - 320 °C -
金型温度 100 - 130 °C -
Feed temperature 80 - 100 °C -
Zone 1 260 - 280 °C -
Zone 2 280 - 300 °C -
Zone 3 300 - 320 °C -
Nozzle temperature 280 - 300 °C -
特殊な特性
成形加工法.
射出成形., その他の押出成形.
特殊な特性.
難燃., Halogen-free
な特性
Creep Resistance
アプリケーション
電気電子
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.