Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NC208 - (PPE+PS)-CF8 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin NC208:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL NC208 compound is based on Polyphenylene Ether (PPE) resin containing 8% carbon fiber. Added features of this grade include: Electrically Conductive, Non-Brominated, Non-Chlorinated Flame Retardant.

UL Yellow Card Link E45587-237056
機械的特性値単位テスト基準
ASTM数据
曲げ弾性率 4900 MPa ASTM D 790
曲げ強さ 117 MPa ASTM D 790
ロックウェル硬度 M 88 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 58 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
1.5mm厚さでの燃焼性 V-1 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
ASTM数据
DTUL @ 66 psi 132 °C ASTM D 648
電気的特性.値単位テスト基準
ASTM数据
表面抵抗率 1E12 Ohm ASTM D 257
その他の特性.値単位テスト基準
密度 1140 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 100 °C -
Pre-drying - Time 3 - 5 h -
Processing humidity ≤0.02 % -
樹脂温度 270 - 310 °C -
金型温度 70 - 110 °C -
Zone 1 250 - 290 °C -
Zone 2 260 - 300 °C -
Zone 3 270 - 310 °C -
特殊な特性
成形加工法.
射出成形.
添加剤.
難燃剤.
特殊な特性.
導電., 難燃.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.