Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin LTA6020 - Americas - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin LTA6020 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL™ LTA6020 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm, 5VB at 2mm, and V0 at 1.5mm. NORYL LTA6020 exhibits good dimensional stability over a wide temperature range, high heat performance, low moisture uptake, and offers long-term aging / retention of mechanical properties. It is an excellent candidate for solar / photovoltaic (PV) junction boxes and outdoor electrical enclosures.

UL Yellow Card Link E45329-100960629
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 20 cm³/10min ISO 1133
温度 300 °C -
荷重 5 kg -
ASTM数据
メルトフローレイト, MFI 4 g/10min ASTM D 1238
温度 250 °C -
荷重 10 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2680 MPa ISO 527
降伏応力 71 MPa ISO 527
降伏ひずみ 4 % ISO 527
破壊応力 57 MPa ISO 527
破壊ひずみ 8 % ISO 527
曲げ弾性率 2600 MPa ISO 178
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 16 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm 8 kJ/m² ISO 180/1A
ASTM数据
降伏応力 72 MPa ASTM D 638
降伏点伸び 6 % ASTM D 638
ノッチ付きIzod衝撃強さ, 1/8 in 220 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 123 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 136 °C ISO 75-1/-2
ビカット軟化温度, 120°C/h 10N 155 °C ISO 306
ビカット軟化温度, 120°C/h 50N 144 °C ISO 306
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
厚さhでの燃焼性 V-1 class IEC 60695-11-10
試験片の厚さ 1.0 mm -
厚さhでの燃焼性 5V 5VB class IEC 60695-11-20
試験片の厚さ 2.0 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 1 mm -
グローワイヤ着火温度 (GWIT) 825 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1 mm -
グローワイヤ着火温度 (GWIT) 825 °C IEC 60695-2-13
GWIT - 試験片の厚さ 2 mm -
グローワイヤ着火温度 (GWIT) 825 °C IEC 60695-2-13
GWIT - 試験片の厚さ 3 mm -
その他の特性.値単位テスト基準
密度. 1130 kg/m³ ISO 1183
密度 1130 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 105 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 280 - 300 °C -
金型温度 80 - 100 °C -
Feed temperature 60 - 80 °C -
Zone 1 260 - 280 °C -
Zone 2 280 - 300 °C -
Zone 3 270 - 290 °C -
特殊な特性
成形加工法.
射出成形.
添加剤.
難燃剤.
特殊な特性.
難燃.
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.