Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin FP5140HF - Americas - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin FP5140HF - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL™ FP5140HF resin is an impact modified, unreinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant with a UL94 flame rating of V1 at 1.5mm. NORYL FP5140HF resin was designed to have very good dimensional stability with high flow and exhibits good rheological properties, high heat resistance, hydrolysis resistance, and very low density. The combination of these properties makes this material an excellent candidate for Flat Panel TV enclosure applications.

UL Yellow Card Link E121562-101543493
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 48 cm³/10min ISO 1133
温度 280 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2530 MPa ISO 527
降伏応力 48 MPa ISO 527
降伏ひずみ 2.7 % ISO 527
破壊応力 44 MPa ISO 527
破壊ひずみ 21.4 % ISO 527
曲げ弾性率 2450 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 7 kJ/m² ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 6 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm 5 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 2940 MPa ASTM D 638
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 80 °C ISO 75-1/-2
ビカット軟化温度, B 97 °C ISO 306
ビカット軟化温度, 120°C/h 50N 100 °C ISO 306
1.5mm厚さでの燃焼性 V-1 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
ASTM数据
DTUL @ 264 psi 78 °C ASTM D 648
ビカット軟化温度 97 °C ASTM D 1525
その他の特性.値単位テスト基準
吸水率. 0.18 % Sim. to ISO 62
吸湿率 0.05 % Sim. to ISO 62
密度. 1110 kg/m³ ISO 1183
密度 1110 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 70 - 80 °C -
Pre-drying - Time 2 - 3 h -
樹脂温度 250 - 285 °C -
金型温度 40 - 65 °C -
Feed temperature 60 - 80 °C -
Zone 1 200 - 220 °C -
Zone 2 230 - 260 °C -
Zone 3 250 - 285 °C -
特殊な特性
成形加工法.
射出成形.
添加剤.
難燃剤.
特殊な特性.
難燃., 高耐衝撃及び耐衝撃改良.
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.