Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin ENG265F - Americas - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin ENG265F - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL™ ENG265F resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This material is suitable for profile extrusion and exhibits very good hydrolytic stability, low moisture absorption, good dimensional stability. NORYL ENG265F resin certifies to NSF 61 and is an excellent candidate for water management applications such as extruded tubes for reverse osmosis systems.

UL Yellow Card Link E121562-221150
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 8 cm³/10min ISO 1133
温度 280 °C -
荷重 5 kg -
ASTM数据
メルトフローレイト, MFI 8.5 g/10min ASTM D 1238
温度 280 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2550 MPa ISO 527
降伏応力 55 MPa ISO 527
降伏ひずみ 3.1 % ISO 527
破壊応力 50 MPa ISO 527
破壊ひずみ 27 % ISO 527
曲げ弾性率 2500 MPa ISO 178
曲げ強さ 95 MPa ISO 178
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 13 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm 8 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 2400 MPa ASTM D 638
降伏応力 56 MPa ASTM D 638
破壊応力 50 MPa ASTM D 638
降伏点伸び 3.3 % ASTM D 638
破断伸び 28 % ASTM D 638
曲げ弾性率 2550 MPa ASTM D 790
ロックウェル硬度 R 119 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 186 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 114 J/m ASTM D 256
温度 -30 °C -
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, B 137 °C ISO 306
ビカット軟化温度, 120°C/h 50N 141 °C ISO 306
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.5 mm -
ASTM数据
DTUL @ 66 psi 132 °C ASTM D 648
DTUL @ 264 psi 118 °C ASTM D 648
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 19.7 kV/mm ASTM D 149
誘電正接, 60 Hz 0.0004 - ASTM D 150
比誘電率, 60 Hz 2.65 - ASTM D 150
その他の特性.値単位テスト基準
密度 1060 kg/m³ ASTM D 792
特殊な特性
耐薬品性
Hydrolytically Stable
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.