Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NIRETAN B AE/V0 - PA6 - Soredi S.p.a.

Material Data Center offers the following functions for NIRETAN B AE/V0:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Niretan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
機械的特性乾燥/調湿単位テスト基準
ASTM数据
降伏応力 80 / - MPa ASTM D 638
破壊応力 60 / - MPa ASTM D 638
曲げ弾性率 2800 / - MPa ASTM D 790
曲げ強さ 120 / - MPa ASTM D 790
ロックウェル硬度 R 120 / - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 48 / - J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 43.2 / - J/m ASTM D 256
温度 0 °C -
熱的特性乾燥/調湿単位テスト基準
ISO データ
線膨張係数, 直角 75 / * E-6/K ISO 11359-1/-2
ASTM数据
UL94 燃焼性 V-0 - UL 94
追加試験片の厚さ 1.6 mm -
DTUL @ 264 psi 70 °C ASTM D 648
溶融温度 215 °C ASTM D 3418
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 1MHz 3.8 / - - IEC 62631-2-1
誘電正接, 1MHz 300 / - E-4 IEC 62631-2-1
体積抵抗率 1E13 / 1E9 Ohm*m IEC 62631-3-1
表面抵抗率 * / 1E10 Ohm IEC 62631-3-2
耐電圧 60 / 40 kV/mm IEC 60243-1
その他の特性.値単位テスト基準
吸水率, 24hr 9 % ASTM D 570
密度 1160 kg/m³ ASTM D 792
特殊な特性
特殊な特性.
難燃.
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.