Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Monprene® CP-11160 - TPE-X - Teknor Apex Co.

Material Data Center offers the following functions for Monprene® CP-11160:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Preliminary Data

The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11160 is a medium hardness, high density, filled grade that is suitable for injection molding.

Adheres to PP

PropertyValueUnitStandard
Tensile Stress at 100% (across flow)1.45MPaISO 37
Tensile Stress at Break (across flow)10.2MPaISO 37
Tensile Strain at Break (across flow)890
%ISO 37
Tear Strength (across flow)25
kN/mISO 34-1
Apparent Shear Viscosity (200 °C)196
PasASTM D3835
機械的特性値単位テスト基準
ISO データ
伸び率100%時の応力 1.66 MPa ISO 527
破壊ひずみ 750 % ISO 37
圧縮永久ひずみ 70℃, 24h 33 % ISO 815
引裂強さ 27 kN/m ISO 34-1
ショア硬さA 60 - ISO 7619-1
その他の特性.値単位テスト基準
密度 1150 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 65 °C -
Pre-drying - Time 2 - 4 h -
樹脂温度 182 - 227 °C -
金型温度 27 - 49 °C -
Zone 1 160 - 177 °C -
Zone 2 182 - 204 °C -
Zone 3 193 - 216 °C -
Nozzle temperature 182 - 227 °C -
Screw speed 50 - 100 rpm -
Back pressure 0.172 - 0.689 MPa -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
Opaque
な特性
Good Adhesion, Soft Feel
耐薬品性
General Chemical Resistance
アプリケーション
汎用, スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.