Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Meytel E6 F40 - PA6-GF40 - Mepol S.r.l.

Material Data Center offers the following functions for Meytel E6 F40:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Meytel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 0.1 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 12500 / 8700 MPa ISO 527
破壊応力 200 / 130 MPa ISO 527
破壊ひずみ 2.7 / 4.5 % ISO 527
曲げ弾性率, 23°C 11000 / 7900 MPa ISO 178
ノッチ付きIzod衝撃強さ, +23°C 17 / 22 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 14.5 / - kJ/m² ISO 180/1A
温度 0 °C -
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10゚C/min 220 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 215 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 215 / * °C ISO 75-1/-2
ビカット軟化温度, B 216 / * °C ISO 306
その他の特性.乾燥/調湿単位テスト基準
吸水率. 5.4 / * % Sim. to ISO 62
密度. 1460 / - kg/m³ ISO 1183
特殊な特性
添加剤.
滑剤.
特殊な特性.
紫外線安定化., 熱安定化.
な特性
Nucleated
アプリケーション
汎用
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.