Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makrolon® GF9425 - PC-GF20 - Covestro Deutschland AG

Material Data Center offers the following functions for Makrolon® GF9425:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 試験片の成形条件. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
  • MVR (300 °C/1.2 kg) 5.0 cm³/10 min
  • 20 % glass fiber reinforced
  • flame retardant
  • UL 94V-0/1.5 mm and 5VA/3.0 mm
  • high viscosity
  • easy release
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 5 cm³/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
成形収縮率, 平行 0.3 % ISO 294-4, 2577
成形収縮率, 直角 0.5 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 5800 MPa ISO 527
降伏応力 86 MPa ISO 527
降伏ひずみ 2.6 % ISO 527
曲げ弾性率, 23°C 5570 MPa ISO 178
曲げ強さ 167 MPa ISO 178
シャルピー衝撃強さ, +23°C 50 kJ/m² ISO 179/1eU
Type of failure C - -
ノッチ付きIzod衝撃強さ, +23°C 8 kJ/m² ISO 180/1A
パンクチャー衝撃－最大応力, +23°C 900 N ISO 6603-2
パンクチャー衝撃－最大応力, -30°C 900 N ISO 6603-2
パンクチャー衝撃エネルギー, +23°C 5 J ISO 6603-2
パンクチャー衝撃エネルギー, -30ﾟC 5 J ISO 6603-2
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 140 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 144 °C ISO 75-1/-2
ビカット軟化温度, B 146 °C ISO 306
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 0.5 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 5V 5VA class IEC 60695-11-20
Yellow Card 可用 はい - -
酸素指数 39 % ISO 4589-1/-2
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 0.75 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 1.5 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 3 mm -
グローワイヤ着火温度 (GWIT) 825 °C IEC 60695-2-13
GWIT - 試験片の厚さ 0.75 mm -
グローワイヤ着火温度 (GWIT) 850 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1.5 mm -
グローワイヤ着火温度 (GWIT) 850 °C IEC 60695-2-13
GWIT - 試験片の厚さ 3 mm -
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
耐電圧 39 kV/mm IEC 60243-1
耐トラッキング性 200 - IEC 60112
その他の特性.値単位テスト基準
密度 1350 kg/m³ ISO 1183
試験片の成形条件.値単位テスト基準
ISO データ
射出成形, 樹脂温度 300 °C ISO 294
射出成形, 金型温度 110 °C ISO 294
射出成形, 射出速度 200 mm/s ISO 294
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 °C -
Pre-drying - Time 2 - 3 h -
樹脂温度 280 - 320 °C -
金型温度 100 °C -
特殊な特性
成形加工法.
射出成形.
添加剤.
離型剤.
特殊な特性.
難燃., Opaque
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.