Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® UT408 - (PC+PET)-I - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® UT408:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
  • (PC+PET) blend, unreinforced
  • impact modified
  • high flow
  • injection molding grade
  • good impact strength
  • dimensional stability and chemical resistance. Suitable for some food contact applications (contact Covestro for more information).
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトボリュームレイト, MVR 20 cm³/10min ISO 1133
温度 270 °C -
荷重 5 kg -
機械的特性単位テスト基準
ISO データ
引張弾性率 2400 MPa ISO 527
降伏応力 59 MPa ISO 527
降伏ひずみ 5.5 % ISO 527
破壊呼びひずみ >50 % ISO 527
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 109 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 131 °C ISO 75-1/-2
線膨張係数, 平行 70 E-6/K ISO 11359-1/-2
線膨張係数, 直角 80 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
電気的特性.単位テスト基準
ISO データ
比誘電率, 100Hz 3.2 - IEC 62631-2-1
比誘電率, 1MHz 3.1 - IEC 62631-2-1
誘電正接, 100Hz 13 E-4 IEC 62631-2-1
誘電正接, 1MHz 140 E-4 IEC 62631-2-1
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
耐電圧 34 kV/mm IEC 60243-1
耐トラッキング性 375 - IEC 60112
その他の特性.単位テスト基準
吸水率 0.5 % Sim. to ISO 62
吸湿率 0.2 % Sim. to ISO 62
密度 1220 kg/m³ ISO 1183
試験片の成形条件.単位テスト基準
ISO データ
射出成形, 樹脂温度 270 °C ISO 294
射出成形, 金型温度 70 °C ISO 294
射出成形, 射出速度 200 mm/s ISO 294
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 110 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.01 % -
樹脂温度 260 - 280 °C -
金型温度 60 - 80 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良., 紫外線安定化.
な特性
Blending Resin
耐薬品性
General Chemical Resistance
Certifications
Food contact, Food approval FDA 21 CFR
領域別の利用可能性
その他の情報
村遜速揃
PREPROCESSING
Max. Water content: 0.01 %
Drying temperature: 110 °C
Drying time:
Circulating air drying oven (50 % fresh air) 4-12 h
Fresh air dryer (high speed dryer) 2-4 h
Dry air dryer 2-4 h

PROCESSING
Melt temperature: 260-280 °C
Mold temperature: 60-80 °C

Use open nozzle.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.