Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® ECO 368R BC70 - SAN - INEOS Styrolution

Material Data Center offers the following functions for Luran® ECO 368R BC70:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 92 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 70 %
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 10 cm³/10min ISO 1133
温度 220 °C -
荷重 10 kg -
成形収縮率, 平行 0.5 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 3700 MPa ISO 527
降伏応力 75 MPa ISO 527
破壊ひずみ 3 % ISO 527
曲げ弾性率, 23°C 3540 MPa ISO 178
曲げ強さ 125 MPa ISO 178
シャルピー衝撃強さ, +23°C 18 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 18 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 2 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 2 kJ/m² ISO 180/1A
Ball indentation hardness 165 MPa ISO 2039-1
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 100[ann.] °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 100[ann.] °C ISO 75-1/-2
ビカット軟化温度, B 106 °C ISO 306
線膨張係数, 平行 70 E-6/K ISO 11359-1/-2
Other Standards[S]
熱伝導率, ソリッド 0.17 W/(m K) DIN 52612-1
S: These properties are reported by the producer according standards that are different to our defaults.  ann.: annealed
光学特性値単位テスト基準
ASTM数据
ヘイズ 1 % ASTM D 1003
視感透過率 89 % ASTM D 1003
Other Standards[S]
くっせつりつ 1.57 - ISO 489
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.値単位テスト基準
吸湿率 0.2 % Sim. to ISO 62
密度. 1080 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
樹脂温度 220 - 260 °C -
金型温度 40 - 80 °C -
Injection speed 200 mm/s -
特殊な特性
成形加工法.
射出成形., その他の押出成形.
納入形状.
ペレット.
特殊な特性.
熱安定化., 透明.
耐薬品性
General Chemical Resistance
Certifications
Contains renewable resources, Food contact, ISCC Plus
アプリケーション
汎用, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.