Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXD921A - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXD921A:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
LEXAN FXD921A compound is based on Polycarbonate (PC) resin for light diffusion special effects. Color package may affect performance. Added features of this grade include: . Transparent/translucent, Brominated Flame Retardant.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 12 cm³/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
ASTM数据
メルトフローレイト, MFI 14.8 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2350 MPa ISO 527
降伏応力 63 MPa ISO 527
降伏ひずみ 6 % ISO 527
破壊応力 60 MPa ISO 527
破壊ひずみ 85 % ISO 527
曲げ弾性率, 23°C 2300 MPa ISO 178
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 73 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 14 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C N kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 70 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 12 kJ/m² ISO 180/1A
温度 -30 °C -
Ball indentation hardness 95 MPa ISO 2039-1
ASTM数据
引張弾性率 2400 MPa ASTM D 638
降伏応力 62 MPa ASTM D 638
破壊応力 66 MPa ASTM D 638
降伏点伸び 6 % ASTM D 638
破断伸び 125 % ASTM D 638
曲げ弾性率 2280 MPa ASTM D 790
曲げ強さ 94 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 760 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 124 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 135 °C ISO 75-1/-2
1.5mm厚さでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 3.0 mm -
Yellow Card 可用 はい - -
ASTM数据
線膨張係数, 平行 75 E-6/K ASTM D 696
DTUL @ 264 psi 123 °C ASTM D 648
ビカット軟化温度 141 °C ASTM D 1525
電気的特性.値単位テスト基準
ISO データ
耐トラッキング性 325 - IEC 60112
ASTM数据
比誘電率, 60 Hz 3 - ASTM D 150
表面抵抗率 1E16 Ohm ASTM D 257
耐アーク 30 s ASTM D 495
その他の特性.値単位テスト基準
吸水率. 0.35 % Sim. to ISO 62
吸湿率 0.15 % Sim. to ISO 62
密度. 1200 kg/m³ ISO 1183
密度 1200 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 280 - 300 °C -
金型温度 80 - 100 °C -
Feed temperature 60 - 80 °C -
Zone 1 260 - 280 °C -
Zone 2 270 - 290 °C -
Zone 3 280 - 300 °C -
Nozzle temperature 270 - 290 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
難燃., 透明., Translucent
な特性
Light Diffusing
アプリケーション
電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.