Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer EXL1613T - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer EXL1613T - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
LEXAN EXL1613T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers extreme low temperature ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN EXL1613T resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.

UL Yellow Card Link E207780-103932491
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 7.5 cm³/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
ASTM数据
メルトフローレイト, MFI 8 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2100 MPa ISO 527
降伏応力 57 MPa ISO 527
降伏ひずみ 5.7 % ISO 527
破壊応力 47 MPa ISO 527
破壊ひずみ 50 % ISO 527
曲げ弾性率 2100 MPa ISO 178
シャルピー衝撃強さ, +23°C, 3mm 95 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C, 3mm 95 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C, 3mm 70 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C, 3mm 20 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C 130 kJ/m² ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 3mm 62 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強, -30°C, 3mm 20 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 2100 MPa ASTM D 638
降伏応力 57 MPa ASTM D 638
破壊応力 49 MPa ASTM D 638
降伏点伸び 5.9 % ASTM D 638
破断伸び 58 % ASTM D 638
曲げ弾性率 2012 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 900 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 690 J/m ASTM D 256
温度 -30 °C -
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 122 °C ISO 75-1/-2
ビカット軟化温度, B 142 °C ISO 306
ビカット軟化温度, 120°C/h 50N 143 °C ISO 306
厚さhでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 0.4 mm -
ASTM数据
DTUL @ 264 psi 122 °C ASTM D 648
ビカット軟化温度 150 °C ASTM D 1525
電気的特性.値単位テスト基準
ASTM数据
表面抵抗率 1E15 Ohm ASTM D 257
体積抵抗率 1E15 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
吸湿率 0.04 % Sim. to ISO 62
密度. 1180 kg/m³ ISO 1183
密度 1180 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 300 - 330 °C -
金型温度 80 - 115 °C -
Zone 1 285 - 305 °C -
Zone 2 295 - 315 °C -
Zone 3 305 - 330 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
透明.
アプリケーション
自動車
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.