Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer DMX1435 - Europe - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer DMX1435 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
LEXAN™ DMX1435 is a UV stabilized standard flow polycarbonate copolymer resin with improved scratch resistance, improved dielectric performance (lower Df). It is both transparency and colorable available solutions to the applications such as 5G related devices, anti-scratch covers, etc.

UL Yellow Card Link E45329-100081387
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 13 cm³/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
ASTM数据
メルトフローレイト, MFI 14.5 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2450 MPa ISO 527
降伏応力 80 MPa ISO 527
降伏ひずみ 7 % ISO 527
破壊応力 60 MPa ISO 527
破壊ひずみ 40 % ISO 527
曲げ弾性率 2450 MPa ISO 178
シャルピー衝撃強さ, +23°C, 3mm N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C, 3mm 47 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C, 3mm 3 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C, 3mm 3 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C N kJ/m² ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 3mm 5 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強, -30°C, 3mm 4 kJ/m² ISO 180/1A
Ball indentation hardness 128 MPa ISO 2039-1
ASTM数据
引張弾性率 2900 MPa ASTM D 638
降伏応力 80 MPa ASTM D 638
破壊応力 65 MPa ASTM D 638
降伏点伸び 7 % ASTM D 638
破断伸び 70 % ASTM D 638
曲げ弾性率 2600 MPa ASTM D 790
ロックウェル硬度 M 93 - ASTM D 785
Taber耐摩耗性 10 mg/1000 cycles ASTM D 1044
ノッチ付きIzod衝撃強さ, 1/8 in 30 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 30 J/m ASTM D 256
温度 -30 °C -
アイゾット衝撃試験, 1/8 in N J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 118 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 131 °C ISO 75-1/-2
ビカット軟化温度, B 138 °C ISO 306
ビカット軟化温度, 120°C/h 50N 140 °C ISO 306
厚さhでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 0.6 mm -
熱伝導率 0.2 W/(m K) DIN 52616
グローワイヤ燃焼性指数 (GWFI) 900 °C IEC 60695-2-12
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
グローワイヤ着火温度 (GWIT) 850 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1 mm -
グローワイヤ着火温度 (GWIT) 825 °C IEC 60695-2-13
GWIT - 試験片の厚さ 2 mm -
グローワイヤ着火温度 (GWIT) 825 °C IEC 60695-2-13
GWIT - 試験片の厚さ 3 mm -
ASTM数据
DTUL @ 66 psi 133 °C ASTM D 648
DTUL @ 264 psi 119 °C ASTM D 648
ビカット軟化温度 139 °C ASTM D 1525
熱伝導率, ソリッド 0.0288 W/(m K) ASTM C 177
比熱 1400 J/(kg K) ASTM C 351
その他の特性.値単位テスト基準
吸水率. 0.27 % Sim. to ISO 62
吸湿率 0.13 % Sim. to ISO 62
密度. 1170 kg/m³ ISO 1183
吸水率, 24hr 0.04 % ASTM D 570
密度 1200 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 295 - 315 °C -
金型温度 70 - 95 °C -
Feed temperature 60 - 80 °C -
Zone 1 260 - 280 °C -
Zone 2 280 - 305 °C -
Zone 3 295 - 315 °C -
特殊な特性
成形加工法.
射出成形.
アプリケーション
自動車
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.