Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer 4701R - Europe - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer 4701R - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
High heat resistant polyphthalate carbonate, provides DTUL of 300F at 264 psi.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 6 cm³/10min ISO 1133
温度 300 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2300 MPa ISO 527
降伏応力 70 MPa ISO 527
降伏ひずみ 7 % ISO 527
破壊ひずみ 50 % ISO 527
曲げ弾性率 2300 MPa ISO 178
シャルピー衝撃強さ, +23°C, 3mm N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C, 3mm N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C, 3mm 46 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C, 3mm 13 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C N kJ/m² ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 3mm 35 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強, -30°C, 3mm 11 kJ/m² ISO 180/1A
ロックウェル硬度 R 127 - ISO 2039-2
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 151 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 166 °C ISO 75-1/-2
ビカット軟化温度, A 185 °C ISO 306
ビカット軟化温度, B 175 °C ISO 306
ビカット軟化温度, 120°C/h 50N 170 °C ISO 306
熱伝導率 0.21 W/(m K) DIN 52616
グローワイヤ燃焼性指数 (GWFI) 850 °C IEC 60695-2-12
GWFI - 試験片の厚さ 2 mm -
電気的特性.値単位テスト基準
ISO データ
比誘電率, 1MHz 3.1 - IEC 62631-2-1
誘電正接, 100Hz 260 E-4 IEC 62631-2-1
その他の特性.値単位テスト基準
密度. 1200 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 125 - 135 °C -
Pre-drying - Time 3 - 4 h -
樹脂温度 325 - 360 °C -
金型温度 100 - 125 °C -
Feed temperature 60 - 80 °C -
Zone 1 300 - 320 °C -
Zone 2 310 - 330 °C -
Zone 3 320 - 340 °C -
特殊な特性
成形加工法.
射出成形.
アプリケーション
自動車
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.