Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KOPLA® KRE1121C - (PA66+ABS) - KOPLA CO., LTD

Material Data Center offers the following functions for KOPLA® KRE1121C:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kopla datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 1.4 / * % ISO 294-4, 2577
成形収縮率, 直角 1.6 / * % ISO 294-4, 2577
ASTM数据
成形収縮率., 平行 0.0135 mm/mm ASTM D 955
成形収縮率, 直角 0.016 mm/mm ASTM D 955
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 2100 / 1000 MPa ISO 527
引張強度 60 / 47 MPa ISO 527
曲げ弾性率 2000 / 850 MPa ISO 178
曲げ強さ 83 / 40 MPa ISO 178
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 54 / 90 kJ/m² ISO 179/1eA
ロックウェル硬度 R 116 - ISO 2039-2
ASTM数据
引張弾性率 2100 / 1000 MPa ASTM D 638
引張強度 60 / 47 MPa ASTM D 638
曲げ弾性率 2000 / 850 MPa ASTM D 790
曲げ強さ 83 / 40 MPa ASTM D 790
ロックウェル硬度 R 116 / - ASTM D 785
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 260 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 70 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 200 / * °C ISO 75-1/-2
線膨張係数, 平行 60 / * E-6/K ISO 11359-1/-2
厚さhでの燃焼性 HB / * class IEC 60695-11-10
ASTM数据
UL94 燃焼性 HB - UL 94
線膨張係数, 平行 60 E-6/K ASTM D 696
DTUL @ 66 psi 180 °C ASTM D 648
溶融温度 260 °C ASTM D 3418
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 1MHz 3 / - - IEC 62631-2-1
誘電正接, 1MHz 0.02 / - E-4 IEC 62631-2-1
体積抵抗率 1E14 / - Ohm*m IEC 62631-3-1
耐電圧 32 / - kV/mm IEC 60243-1
ASTM数据
耐電圧, 短い時間 32 / - kV/mm ASTM D 149
誘電正接, 1 MHz 0.02 / - - ASTM D 150
比誘電率, 1 MHz 3 / - - ASTM D 150
体積抵抗率 1E14 / - Ohm*cm ASTM D 257
その他の特性.乾燥/調湿単位テスト基準
吸水率. 1.2 / * % Sim. to ISO 62
密度. 1100 / - kg/m³ ISO 1183
吸水率, 24hr 1.2 % ASTM D 570
密度 1100 kg/m³ ASTM D 792
特殊な特性
特殊な特性.
高耐衝撃及び耐衝撃改良.
アプリケーション
自動車, 電気電子
領域別の利用可能性
北アメリカ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.