Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kepstan® 8010C40 - PAEK-CF40 - ARKEMA

Material Data Center offers the following functions for Kepstan® 8010C40:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kepstan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文

KEPSTAN® PEKK resin is a high performance thermoplastic material, based on PolyEtherKetoneKetone (PEKK) highly stable chemical backbone. Its semi crystalline structure in solid state offers an outstanding combination of mechanical and thermal strength together with chemical and fire resistance.


KEPSTAN® 8010C30 is a carbon fiber reinforced compound, based on the 8000 series of KEPSTAN® resins. This series offers the highest glass transition temperature and the highest crystallinity, leading to the best tensile and compression strengths among the different series of KEPSTAN® PEKK copolymers.


KEPSTAN® 8010C30 is a low flow grade, suitable for extrusion, compression and injection molding. 


KEPSTAN® 8010C30 is available in pellet form, and standard packaging is 10 kg boxes.

Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 18 cm³/10min ISO 1133
温度 380 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
シャルピー衝撃強さ, +23°C 34 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 6 kJ/m² ISO 179/1eA
ASTM数据
引張弾性率 30300 MPa ASTM D 638
引張強度 239 MPa ASTM D 638
破断伸び 1.3 % ASTM D 638
曲げ弾性率 24800 MPa ASTM D 790
曲げ強さ 369 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 81.7 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 360 °C ISO 11357-1/-3
ガラス転移点, 10ﾟC/min 165 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 300 °C ISO 75-1/-2
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 3.0 mm -
電気的特性.値単位テスト基準
ASTM数据
表面抵抗率 100000 Ohm ASTM D 257
体積抵抗率 100000 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
吸水率. 0.4 % Sim. to ISO 62
密度 1450 kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形., 異形押出成形., その他の押出成形., Compression Molding
納入形状.
ペレット., 黒
特殊な特性.
難燃.
な特性
High Crystallinity
耐薬品性
General Chemical Resistance
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
Drying temperature and time: 120°C for 6 to 8 hours
Processing temperature: 370 – 380°C
Temperature settings - Injection: Rear 350°C / Center 375°C / Front 370°C / Nozzle 385°C
Mold temperature (to facilitate filling of the cavity and polymer crystallization): 230 - 240°C
Temperature settings - Extrusion:  Zones 1/2/3/4: 355°C/ 370°C/ 385°C/ 385°C   Die: 370°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.