Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOSTAFORM® S 27063 - POM - Celanese

Check here, which other Hostaform datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Chemical abbreviation according to ISO 1043-1: POM-HI, Molding compound ISO 29988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing elastomer-containing injection molding type based on HOSTAFORM® C 27021; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm thickness. Ranges of applications: For thin-walled molded parts with higher energy-absorbing capacity UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)

Flammability @1.6mm nom. thickn.	HB	-
Flammability at thickness h (3.17 mm)	HB	UL recognition (h)

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	20	cm³/10min	ISO 1133
温度	190	°C	-
荷重	2.16	kg	-
成形収縮率, 平行	1.9	%	ISO 294-4, 2577
成形収縮率, 直角	1.8	%	ISO 294-4, 2577

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	2200	MPa	ISO 527
降伏応力	54	MPa	ISO 527
降伏ひずみ	9	%	ISO 527
破壊呼びひずみ	30	%	ISO 527
シャルピー衝撃強さ, +23°C	140	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	90	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	9	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	6	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	166	°C	ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa	84	°C	ISO 75-1/-2
線膨張係数, 平行	120	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	1.6	mm	-
厚さhでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	3.2	mm	-
Yellow Card 可用	はい	-	-

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 100Hz	4.2	-	IEC 62631-2-1
比誘電率, 1MHz	4.2	-	IEC 62631-2-1
誘電正接, 100Hz	50	E-4	IEC 62631-2-1
誘電正接, 1MHz	150	E-4	IEC 62631-2-1
体積抵抗率	1E11	Ohm*m	IEC 62631-3-1
表面抵抗率	1E13	Ohm	IEC 62631-3-2
耐電圧	28	kV/mm	IEC 60243-1

その他の特性.	値	単位	テスト基準
吸水率	0.65	%	Sim. to ISO 62
吸湿率	0.2	%	Sim. to ISO 62
密度	1390	kg/m³	ISO 1183

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット.

添加剤.

離型剤.

特殊な特性.

高耐衝撃及び耐衝撃改良.

な特性

Thermal Stability, Copolymer

耐薬品性

General Chemical Resistance, Oxidation Resistance

アプリケーション

自動車

領域別の利用可能性

北アメリカ., ヨーロッパ., 南・中央アメリカ., 近東/アフリカ

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.