Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOSTAFORM® MT® SlideX® 2404 ECO-B - POM - Celanese

Material Data Center offers the following functions for HOSTAFORM® MT® SlideX® 2404 ECO-B:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostaform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機能
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 25 cm³/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
成形収縮率, 平行 1.9 % ISO 294-4, 2577
成形収縮率, 直角 1.8 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 2550 MPa ISO 527
降伏応力 55 MPa ISO 527
降伏ひずみ 7 % ISO 527
破壊呼びひずみ 50 % ISO 527
シャルピー衝撃強さ, +23°C 160 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C 150 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 5.5 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 5.5 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 166 °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 90 °C ISO 75-1/-2
線膨張係数, 平行 140 E-6/K ISO 11359-1/-2
線膨張係数, 直角 140 E-6/K ISO 11359-1/-2
その他の特性.値単位テスト基準
吸水率 0.6 % Sim. to ISO 62
吸湿率 0.2 % Sim. to ISO 62
密度 1400 kg/m³ ISO 1183
機能
応力-ひずみ. , HOSTAFORM® MT® SlideX® 2404 ECO-B, POM, Celanese
割線弾性率−ひずみ. , HOSTAFORM® MT® SlideX® 2404 ECO-B, POM, Celanese
特殊な特性
成形加工法.
射出成形.
納入形状.
顆粒.
な特性
Tribologic Grade, Copolymer
Certifications
Food approval FDA 21 CFR, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved, Drug Master File, Device Master File
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.