Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grilamid LV-50H FWA black 9225 - PA12-GF50 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Check here, which other Grilamid datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Product Nomenclature: ISO 16396-PA12,GF50,M1H,C18-120

 

Product Attributes

Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)

Markets

	Industry & Consumer goods
	Heating systems, Housewares, Sanitary, water and gas supply

Approvals

	Food Contact
	NSF 51, EU Requirements, FDA
	Potable Water Contact
	NSF 61, KTW, WRAS, ACS, DVGW W270

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
成形収縮率, 平行	0.1 / *	%	ISO 294-4, 2577
成形収縮率, 直角	0.5 / *	%	ISO 294-4, 2577

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	12000 / 11500	MPa	ISO 527
破壊応力	155 / 135	MPa	ISO 527
破壊ひずみ	5 / 6	%	ISO 527
シャルピー衝撃強さ, +23°C	90 / 80	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	90 / 80	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	19 / 20	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	15 / 15	kJ/m²	ISO 179/1eA
ショア硬さD	82 / *	-	ISO 7619-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	178 / *	°C	ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa	165 / *	°C	ISO 75-1/-2
荷重たわみ温度, 8.00 MPa	125 / *	°C	ISO 75-1/-2
線膨張係数, 平行	15 / *	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	120 / *	E-6/K	ISO 11359-1/-2
厚さhでの燃焼性	HB / *	class	IEC 60695-11-10
試験片の厚さ	0.8 / *	mm	-

電気的特性.	乾燥/調湿	単位	テスト基準
ISO データ
体積抵抗率	- / 1E11	Ohm*m	IEC 62631-3-1
表面抵抗率	* / 1E12	Ohm	IEC 62631-3-2
耐電圧	- / 35	kV/mm	IEC 60243-1
耐トラッキング性	- / 600	-	IEC 60112

その他の特性.	乾燥/調湿	単位	テスト基準
吸水率	0.8 / *	%	Sim. to ISO 62
吸湿率	0.4 / *	%	Sim. to ISO 62
密度	1470 / -	kg/m³	ISO 1183

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

顆粒., 黒

特殊な特性.

光安定化., 紫外線安定化., 熱安定化.

Certifications

Food contact, Food approval FDA 21 CFR, Drinking water contact, Drinking water contact KTW, Drinking water contact DVGW W270, Drinking water contact NSF 61

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.