Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GP2450NH-2 - PA9T-GF45 FR - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

GENESTAR GP2450NH-2 is an injection molding grade with 45% GF developed for reflow applications. It is halogen-free and has a v0 flammability.

Thanks to its JEDEC MSL 1 rating (moisture sensitive level 1), this grade shows an excellent resistance to blisters.

GENESTAR GP2450NH-2 exhibits a good balance between mechanical properties, low warpage and a high processability, making it suitable for reflow components such as:

• DDR4 connectors
• USB 3.0 type C connectors
• wire-to-board and board-to-board connectors

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
成形収縮率, 平行	0.2	%	ISO 294-4, 2577
成形収縮率, 直角	0.7	%	ISO 294-4, 2577

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	15100	MPa	ISO 527
引張強度	150	MPa	ISO 527
破壊応力	146	MPa	ISO 527
破壊ひずみ	1.5	%	ISO 527
曲げ弾性率, 23°C	13900	MPa	ISO 178
曲げ強さ	220	MPa	ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C	9.3	kJ/m²	ISO 179/1eA
ASTM数据
引張強度	165	MPa	ASTM D 638
曲げ弾性率	13000	MPa	ASTM D 790
曲げ強さ	224	MPa	ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in	100	J/m	ASTM D 256

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	306	°C	ISO 11357-1/-3
ガラス転移点, 10°C/min	125	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	280	°C	ISO 75-1/-2
厚さhでの燃焼性	V-0	class	IEC 60695-11-10
試験片の厚さ	0.4	mm	-
ASTM数据
UL94 燃焼性	V-0	-	UL 94
DTUL @ 264 psi	285	°C	ASTM D 648
溶融温度	306	°C	ASTM D 3418
ガラス転移温度	125	°C	ASTM E 1356

電気的特性.	値	単位	テスト基準
ISO データ
耐トラッキング性	600	-	IEC 60112
ASTM数据
耐電圧, 短い時間	30	kV/mm	ASTM D 149
体積抵抗率	>1E15	Ohm*cm	ASTM D 257

その他の特性.	値	単位	テスト基準
吸水率	0.1	%	Sim. to ISO 62
密度	1530	kg/m³	ISO 1183
密度	1530	kg/m³	ASTM D 792

機能

特殊な特性

成形加工法.

射出成形.

特殊な特性.

難燃., Halogen-free, 熱安定化.

な特性

Low Warpage, Weldable

アプリケーション

電気電子

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.