Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GP2300S - PA9T-GF30 FR - Kuraray Co., Ltd.

Material Data Center offers the following functions for Genestar™ GP2300S:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文
GENESTAR GP2300S is an injection molding grade with 30% GF developed for reflow applications. It is halogen-free and has a V0 flammability rating.

Thanks to its JEDEC MSL 1 rating (moisture sensitive level 1), this grade shows an excellent resistance to blisters.


GENESTAR GP2300F is suitable for all kind of reflow components such as:
  • FPC connectors
  • Board-to-board connectors
  • wire-to-board connectors
  • automotive connectors
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.2 % ISO 294-4, 2577
成形収縮率, 直角 0.9 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 10600 MPa ISO 527
破壊応力 120 MPa ISO 527
破壊ひずみ 1.8 % ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C 7.2 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 306 °C ISO 11357-1/-3
ガラス転移点, 10°C/min 125 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 274 °C ISO 75-1/-2
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 0.4 mm -
Yellow Card 可用 はい - -
電気的特性.値単位テスト基準
ISO データ
耐トラッキング性 600 - IEC 60112
その他の特性.値単位テスト基準
吸水率 0.1 % Sim. to ISO 62
密度 1420 kg/m³ ISO 1183
機能
応力-ひずみ. , Genestar™ GP2300S, PA9T-GF30 FR, Kuraray
割線弾性率−ひずみ. , Genestar™ GP2300S, PA9T-GF30 FR, Kuraray
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
難燃., Halogen-free, 熱安定化.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.