Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® 0320 - PPS - Celanese

Material Data Center offers the following functions for FORTRON® 0320:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
0320 exhibits a high melt strength for extrusion processes. The material demonstrates excellent heat and chemical resistance. The intended use of this product is for extruding monofilament/fibers, rod and slab. Available standard in powder 'flake' (0320B0), ground powder (0320B0/100 µm), pellet (0320P0) and crystallized pellet (0320C0) form.

Flammability at thickness h (3 mm)V-0-
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 1.2 % ISO 294-4, 2577
成形収縮率, 直角 1.5 % ISO 294-4, 2577
溶融時の比熱 1830 J/(kg K) -
機械的特性値単位テスト基準
ISO データ
引張弾性率 3500 MPa ISO 527
破壊応力 90 MPa ISO 527
破壊ひずみ 8 % ISO 527
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 280 °C ISO 11357-1/-3
ガラス転移点, 10°C/min 90 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 115 °C ISO 75-1/-2
荷重たわみ温度, 8.00 MPa 95 °C ISO 75-1/-2
線膨張係数, 平行 52 E-6/K ISO 11359-1/-2
線膨張係数, 直角 53 E-6/K ISO 11359-1/-2
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 3.0 mm -
電気的特性.値単位テスト基準
ISO データ
比誘電率, 1MHz 4.6 - IEC 62631-2-1
誘電正接, 1MHz 11 E-4 IEC 62631-2-1
体積抵抗率 1E9 Ohm*m IEC 62631-3-1
耐電圧 18 kV/mm IEC 60243-1
その他の特性.値単位テスト基準
吸水率 0.02 % Sim. to ISO 62
密度 1350 kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形., Fiber Extrusion, フィルム押出成形., 異形押出成形., シート押出成形., その他の押出成形.
納入形状.
ペレット., パウダー.
特殊な特性.
熱安定化.
な特性
Melt Strength
耐薬品性
General Chemical Resistance
アプリケーション
Monofilament
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
その他の情報
村遜速揃
In spite of the minimum moisture absorption a drying of FORTRON is necessary. Predrying in a dehumidified air dryer at 120 degC/3-4 hours is recommended.
On injection molding machines with 15-25 D long three-section screws, are usual in the trade, the unreinforced FORTRON is processable. A shut-off nozzle is recommended.

Melt temperature 310-320 degC
Mold wall temperature at least 140 degC

A medium injection rate is normally preferred. All mold cavities must be effectively vented.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.