Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Flomat 515/20 - UP-GF20 - Devi Polymers Private Limited

Material Data Center offers the following functions for Flomat 515/20:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flomat datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
Other Standards[S]
成形収縮率, 平行 0.2 % BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
機械的特性単位テスト基準
Other Standards[S]
引張強度 49 MPa BS-2782
曲げ強さ 127 MPa BS-2782
圧縮強度 147 MPa BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性単位テスト基準
ASTM数据
UL94 燃焼性 V-0 - UL 94
電気的特性.単位テスト基準
ASTM数据
耐アーク 180 s ASTM D 495
Other Standards[S]
体積抵抗率 1E11 Ohm*m DIN 53482
表面抵抗率 1E12 Ohm DIN 53482
耐電圧 10 kV/mm BS 2782
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.単位テスト基準
Other Standards[S]
吸水率. 0.2 % BS-2782
密度. 1800 kg/m³ BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Compression Molding
納入形状.
シート状成形材料
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.