Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 9370AU - TPU - Covestro Deutschland AG

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

機械的特性 - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

• Extrusion- and injection molding grade
• with special UV stabilizers
• very good hydrolysis and microbial resistance
• good low-temperature flexibility
• free from plasticizers
• high moisture vapor transmission rate
  Application:
• breathable films
• Films
• Sports shoe soles
• hard - soft systems

機械的特性	値	単位	テスト基準
ISO データ
伸び率10%時の応力	0.6	MPa	ISO 527
伸び率100%時の応力	2.9	MPa	ISO 527
伸び率300%時の応力	5	MPa	ISO 527
破壊応力 TPE	26	MPa	ISO 527
破壊ひずみ TPE	>300	%	ISO 527
圧縮永久ひずみ 70℃, 24h	49	%	ISO 815
引裂強さ	40	kN/m	ISO 34-1
耐摩耗性	70	mm³	ISO 4649
ショア硬さA	70	-	ISO 7619-1

その他の特性.	値	単位	テスト基準
密度	1060	kg/m³	ISO 1183

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	1 - 2	h	-
Processing humidity	≤0.05	%	-
樹脂温度	190 - 210	°C	-
金型温度	20 - 40	°C	-

機能

特殊な特性

成形加工法.

射出成形., フィルム押出成形., 異形押出成形., シート押出成形., その他の押出成形.

特殊な特性.

紫外線安定化.

耐薬品性

Hydrolytically Stable

アプリケーション

スポーツ用品

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 190-210 °C
Mold temperature: 20-40 °C

その他の押出成形.

 Preprocessing

Max. Water content	≤0.05 %
Drying temperature	70-110 °C
Dry air dryer	1-2 h

 Processing

Melt temperature

175-210 °C

族臓遜造揃

 Preprocessing

Max. Water content	≤0.05 %
Drying temperature	70-110 °C
Dry air dryer	1-2 h

 Processing

Melt temperature

195-215 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.