Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 85786A - TPU - Covestro Deutschland AG

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

機械的特性 - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

• Grade for calandering
• no yellowing under the action of UV light
• good low-temperature flexibility
• high rebound resilience
• improved microbial resistance
• Improved hydrolysis resistance
  Application:
• Textile coating

機械的特性	値	単位	テスト基準
ISO データ
伸び率10%時の応力	2.8	MPa	ISO 527
伸び率100%時の応力	7.2	MPa	ISO 527
伸び率300%時の応力	11	MPa	ISO 527
破壊応力 TPE	27	MPa	ISO 527
破壊ひずみ TPE	>300	%	ISO 527
圧縮永久ひずみ 70℃, 24h	44	%	ISO 815
引裂強さ	60	kN/m	ISO 34-1
耐摩耗性	30	mm³	ISO 4649
ショア硬さA	86	-	ISO 7619-1

その他の特性.	値	単位	テスト基準
密度	1130	kg/m³	ISO 1183

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	1 - 2	h	-
Processing humidity	≤0.05	%	-
樹脂温度	170 - 190	°C	-
金型温度	20 - 40	°C	-

機能

特殊な特性

成形加工法.

射出成形.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 170-190 °C
Mold temperature: 20-40 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.