Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYCOLOY™ non-FR Resin CX5430 - (PC+ABS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for CYCOLOY™ non-FR Resin CX5430:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Cycoloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
CYCOLOY CX5430 resin is a general purpose Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend developed for thin wall applications requiring weld line strength, high flow and impact together with a good balance of other properties.

UL Yellow Card Link: E45329-548607
UL Yellow Card Link1: E121562-591653
UL Yellow Card Link2: E207780-563407
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 18 cm³/10min ISO 1133
温度 260 °C -
荷重 5 kg -
ASTM数据
メルトフローレイト, MFI 19 g/10min ASTM D 1238
温度 260 °C -
荷重 5 kg -
成形収縮率., 平行 0.006 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 2400 MPa ISO 527
降伏応力 48 MPa ISO 527
降伏ひずみ 5 % ISO 527
破壊応力 44 MPa ISO 527
破壊ひずみ >50 % ISO 527
曲げ弾性率, 23°C 2300 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C, 3mm 40 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C, 3mm 20 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 40 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 20 kJ/m² ISO 180/1A
温度 -30 °C -
ロックウェル硬度 L 90 - ISO 2039-2
ASTM数据
引張弾性率 2400 MPa ASTM D 638
降伏応力 50 MPa ASTM D 638
破壊応力 45 MPa ASTM D 638
降伏点伸び 5 % ASTM D 638
破断伸び 50 % ASTM D 638
曲げ弾性率 2300 MPa ASTM D 790
Taber耐摩耗性 70 mg/1000 cycles ASTM D 1044
ノッチ付きIzod衝撃強さ, 1/8 in 500 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 250 J/m ASTM D 256
温度 -30 °C -
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 95 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 117 °C ISO 75-1/-2
ビカット軟化温度, B 114 °C ISO 306
線膨張係数, 平行 80 E-6/K ISO 11359-1/-2
線膨張係数, 直角 80 E-6/K ISO 11359-1/-2
厚さhでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.0 mm -
ASTM数据
UL94 燃焼性 HB - UL 94
追加試験片の厚さ 1 mm -
線膨張係数, 平行 80 E-6/K ASTM D 696
線膨張係数, 直角 80 E-6/K ASTM D 696
DTUL @ 66 psi 115 °C ASTM D 648
DTUL @ 264 psi 95 °C ASTM D 648
ビカット軟化温度 115 °C ASTM D 1525
熱伝導率, ソリッド 0.2 W/(m K) ASTM C 177
電気的特性.値単位テスト基準
ISO データ
誘電正接, 1MHz 110 E-4 IEC 62631-2-1
耐電圧 25 kV/mm IEC 60243-1
ASTM数据
表面抵抗率 1E15 Ohm ASTM D 257
体積抵抗率 1E15 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
吸水率. 0.3 % Sim. to ISO 62
吸湿率 0.07 % Sim. to ISO 62
密度. 1150 kg/m³ ISO 1183
密度 1150 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 100 - 110 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 260 - 290 °C -
金型温度 60 - 90 °C -
Feed temperature 60 - 80 °C -
Zone 1 230 - 260 °C -
Zone 2 250 - 290 °C -
Zone 3 250 - 290 °C -
Nozzle temperature 240 - 280 °C -
特殊な特性
成形加工法.
射出成形.
アプリケーション
電気電子, 汎用, 医療の, パッケージング, スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.