Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYCOLOY™ FR Resin CX2244ME - Americas - (PC+ABS) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Cycoloy datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

CYCOLOY CX2244ME Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, medium flow, non chlorinated/brominated flame retardant grade. It has a UL94 V0@0.75mm and 5VB@1.5mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications and hospital/medical equipment.

UL Yellow Card Link E121562-546346

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	15	cm³/10min	ISO 1133
温度	260	°C	-
荷重	2.16	kg	-
溶融時の密度	1060	kg/m³	-
溶融時の熱伝導率	0.24	W/(m K)	-
溶融時の比熱	2050	J/(kg K)	-
突き出し時の時の温度	94	°C	-
ASTM数据
メルトフローレイト, MFI	18	g/10min	ASTM D 1238
温度	260	°C	-
荷重	2.16	kg	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	2600	MPa	ISO 527
降伏応力	65	MPa	ISO 527
降伏ひずみ	4	%	ISO 527
破壊応力	50	MPa	ISO 527
破壊ひずみ	50	%	ISO 527
曲げ弾性率	2500	MPa	ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C, 3mm	40	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C, 3mm	10	kJ/m²	ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 3mm	40	kJ/m²	ISO 180/1A
ノッチ付きアイゾット衝撃強, -30°C, 3mm	10	kJ/m²	ISO 180/1A
ASTM数据
引張弾性率	2600	MPa	ASTM D 638
降伏応力	65	MPa	ASTM D 638
破壊応力	58	MPa	ASTM D 638
降伏点伸び	4.1	%	ASTM D 638
破断伸び	100	%	ASTM D 638
曲げ弾性率	2500	MPa	ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in	700	J/m	ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature	175	J/m	ASTM D 256
温度	-30	°C	-

熱的特性	値	単位	テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa	93	°C	ISO 75-1/-2
ビカット軟化温度, B	110	°C	ISO 306
ビカット軟化温度, 120°C/h 50N	113	°C	ISO 306
線膨張係数, 平行	77	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	77	E-6/K	ISO 11359-1/-2
厚さhでの燃焼性	V-0	class	IEC 60695-11-10
試験片の厚さ	0.8	mm	-
厚さhでの燃焼性 5V	5VB	class	IEC 60695-11-20
試験片の厚さ	1.5	mm	-
グローワイヤ燃焼性指数 (GWFI)	960	°C	IEC 60695-2-12
グローワイヤ着火温度 (GWIT)	800	°C	IEC 60695-2-13
GWIT - 試験片の厚さ	3	mm	-
ASTM数据
DTUL @ 264 psi	89	°C	ASTM D 648
ビカット軟化温度	110	°C	ASTM D 1525

電気的特性.	値	単位	テスト基準
ISO データ
体積抵抗率	1E13	Ohm*m	IEC 62631-3-1
表面抵抗率	>1E15	Ohm	IEC 62631-3-2
耐電圧	35	kV/mm	IEC 60243-1

その他の特性.	値	単位	テスト基準
吸水率.	0.2	%	Sim. to ISO 62
吸湿率	0.1	%	Sim. to ISO 62
密度.	1200	kg/m³	ISO 1183
密度	1190	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	80 - 90	°C	-
Pre-drying - Time	2 - 4	h	-
Processing humidity	≤0.02	%	-
樹脂温度	250 - 300	°C	-
金型温度	60 - 85	°C	-
Feed temperature	60 - 80	°C	-
Zone 1	230 - 280	°C	-
Zone 2	240 - 290	°C	-
Zone 3	250 - 300	°C	-

機能

特殊な特性

成形加工法.

射出成形.

添加剤.

難燃剤.

特殊な特性.

難燃.

耐薬品性

General Chemical Resistance

領域別の利用可能性

北アメリカ.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.