Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC S 1800 - UP-(MD+GF)65 - Polynt S.p.A.

Material Data Center offers the following functions for BMC S 1800:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
storage and processing conditions
storage condition: in a dry place at 15-25 °C, out of direct sun light
moulding time: 30 sec./mm
moulding pressure: 60 - 110 bar
moulding temperature: 140 - 160°C
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.1 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
シャルピー衝撃強さ, +23°C 60 kJ/m² ISO 179/1eU
ロックウェル硬度 M 80 - ISO 2039-2
Other Standards[S]
曲げ弾性率, 23°C 9000 MPa ISO 14125A
曲げ強さ 120 MPa ISO 14125A
S: These properties are reported by the producer according standards that are different to our defaults.
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 1E12 Ohm*m IEC 62631-3-1
表面抵抗率 1E14 Ohm IEC 62631-3-2
耐トラッキング性 600 - IEC 60112
その他の特性.値単位テスト基準
吸水率. 0.2 % Sim. to ISO 62
密度. 1750 kg/m³ ISO 1183
特殊な特性
成形加工法.
Compression Molding
納入形状.
塊状成形材料
特殊な特性.
高耐衝撃及び耐衝撃改良.
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.