Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ALFATER XL A70I 3EFSL0000 - TPV - MOCOM Compounds GmbH & Co. KG

Material Data Center offers the following functions for ALFATER XL A70I 3EFSL0000:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Alfater datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Base PolymerThermoplastic Vulcanisate (PP+EPDM)
Colourblack
Service Temperaturemax. range (depending on load, geometry, etc.) -40-125 °C
Special Featuresimproved abrasion resistance,slip-optimized,easy flow,high surface quality,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Market SegmentAutomotive,building and construction,do-it-yourself,electrical and electronic,sport and leisure,Furniture
Application Areainjection moulded parts
Typical Applicationsseals,sealing lip,handles,soft touch elements,impact protection / shock absorber,bearings and sliding elements,thin walled parts,profile,cable ducts,2K components,casters
Adhesion toPolypropylene Homopolymer,Polypropylene Copolymer,Polyethylene,Thermoplastic Vulcanisate (PP+EPDM),Thermoplastic Olefin Elastomer,Thermoplastic Elastomer general
機械的特性値単位テスト基準
ISO データ
引裂強さ 23 kN/m ISO 34-1
耐摩耗性 260 mm³ ISO 4649
ショア硬さA 70 - ISO 7619-1
その他の特性.値単位テスト基準
密度 950 kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
納入形状.
黒
特殊な特性.
紫外線安定化.
な特性
Good Adhesion, Soft Feel
耐薬品性
General Chemical Resistance, Hydrolytically Stable, Ozone Resistance
アプリケーション
自動車, 建築構造, 電気電子, スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 近東/アフリカ
その他の情報
村遜速揃
Pre-Drying Conditionsin a dry air (dessiccant) dryer 70-80 °C
for 2-4 h
max. moisture content <0,10 %
Processing Injection Mouldingmelt temperature 190-220 °C
mould temperature 10-60 °C
injection speed middle - high
back pressure (hydraulic) >3 bar
holding pressure 50-70% of injection pressure
Storagedry, protected from light
not above 30°C
tightly sealed
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.