Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Adflex Q 401 F - TPO - LyondellBasell Industries

Material Data Center offers the following functions for Adflex Q 401 F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Adflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 0.65 g/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
降伏応力 15 MPa ISO 527
降伏ひずみ 27 % ISO 527
破壊応力 21 MPa ISO 527
破壊ひずみ >50 % ISO 527
曲げ弾性率, 23°C 480 MPa ISO 178
ノッチ付きIzod衝撃強さ, +23°C 60 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 4 kJ/m² ISO 180/1A
温度 -40 °C -
ショア硬さD 49 - ISO 7619-1
ASTM数据
ショア硬さD 49 - ASTM D 2240
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 164 °C ISO 11357-1/-3
荷重たわみ温度, 0.45 MPa 57 °C ISO 75-1/-2
ビカット軟化温度, A 108 °C ISO 306
その他の特性.値単位テスト基準
密度. 890 kg/m³ ISO 1183
機械的特性(ィルム)値単位テスト基準
ASTM Data
降伏応力, 平行 18 MPa ASTM D 882
降伏応力, 直角 15 MPa ASTM D 882
破壊応力, 平行 68 MPa ASTM D 882
破壊応力, 直角 48 MPa ASTM D 882
破断伸び, 平行 670 % ASTM D 882
破断伸び, 直角 870 % ASTM D 882
押出成形のタイプ blown - -
試験片の厚さ 0.05 mm -
特殊な特性
成形加工法.
Blown Film Extrusion, フィルム押出成形.
添加剤.
ブロッキング防止剤.
特殊な特性.
熱安定化.
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR
領域別の利用可能性
北アメリカ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.