Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACRYPET IR G504 001 - PMMA - Mitsubishi Chemical Corporation

Material Data Center offers the following functions for ACRYPET IR G504 001:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Acrypet datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 0.9 g/10min ISO 1133
温度 230 °C -
荷重 3.8 kg -
成形収縮率, 平行 0.6 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 1700 MPa ISO 527
引張強度 51 MPa ISO 527
曲げ弾性率, 23°C 1800 MPa ISO 178
シャルピー衝撃強さ, +23°C 73 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 4.6 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 5.5 kJ/m² ISO 180/1A
ロックウェル硬度 M 66 - ISO 2039-2
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 91 °C ISO 75-1/-2
ビカット軟化温度, B 93 °C ISO 306
ASTM数据
線膨張係数, 平行 100 E-6/K ASTM D 696
熱伝導率, ソリッド 0.0288 W/(m K) ASTM C 177
光学特性値単位テスト基準
ISO Data
ヘイズ 0.7 - ISO 14782
視感透過率 92 % ISO 13468-1, -2
ASTM数据
くっせつりつ 1.49 - ASTM D 542
その他の特性.値単位テスト基準
吸水率. 0.3 % Sim. to ISO 62
密度. 1160 kg/m³ ISO 1183
特殊な特性
特殊な特性.
紫外線安定化.
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.