Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACRYLITE® Heatresist hw55 - PMMA - Evonik CYRO LLC

Material Data Center offers the following functions for ACRYLITE® Heatresist hw55:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Acrylite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 1.2 cm³/10min ISO 1133
温度 230 °C -
荷重 3.8 kg -
成形収縮率, 平行 0.4 % ISO 294-4, 2577
ASTM数据
メルトフローレイト, MFI 1.3 g/10min ASTM D 1238
温度 230 °C -
荷重 3.8 kg -
成形収縮率., 平行 0.0095 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 3600 MPa ISO 527
破壊応力 80 MPa ISO 527
破壊ひずみ 3.5 % ISO 527
シャルピー衝撃強さ, +23°C 20 kJ/m² ISO 179/1eU
ASTM数据
引張弾性率 3800 MPa ASTM D 638
引張強度 86 MPa ASTM D 638
降伏点伸び 3 % ASTM D 638
破断伸び 3 % ASTM D 638
曲げ弾性率 3500 MPa ASTM D 790
曲げ強さ 137 MPa ASTM D 790
ロックウェル硬度 M 100 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/4 in 13 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 106 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 109 °C ISO 75-1/-2
ビカット軟化温度, B 120 °C ISO 306
線膨張係数, 平行 64 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.6 mm -
ASTM数据
線膨張係数, 平行 101 E-6/K ASTM D 696
ビカット軟化温度 119 °C ASTM D 1525
光学特性値単位テスト基準
ISO Data
視感透過率 91 % ISO 13468-1, -2
ASTM数据
ヘイズ 1 % ASTM D 1003
視感透過率 91 % ASTM D 1003
その他の特性.値単位テスト基準
吸水率. 2.2 % Sim. to ISO 62
吸湿率 0.6 % Sim. to ISO 62
密度. 1190 kg/m³ ISO 1183
吸水率, 平衡 0.3 % ASTM D 570
密度 1190 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形., その他の押出成形.
納入形状.
ペレット.
特殊な特性.
紫外線安定化., 熱安定化.
な特性
Light Guiding, Melt Strength
耐薬品性
General Chemical Resistance
アプリケーション
自動車, 医療の
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.