Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® 65B - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® 65B:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Vydyne 65B is a medium-high viscosity resin used for extrusion-compounding. It is desirable to include this neat resin in a formulation in which the melt strength of the final product is critical for the application. Vydyne 65B exhibits good initial color and it has a moisture level below 0.1%. Resistance of Vydyne 65B to heat, oil and wear is typical of PA66 neat resins.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 2.0 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.9 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 3100 / 1500 MPa ISO 527
Carico unitario a trazione 83 / 55 MPa ISO 527
Deformazione a snervamento 5.5 / 20 % ISO 527
Resistenza all'urto Charpy, +23°C N / N kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C N / N kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 6 / 40 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 6 / 7 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 260 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 65 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 195 / * °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 100 / * E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 100 / * E-6/K ISO 11359-1/-2
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'umidità 2.5 / * % Sim. alla ISO 62
Massa volumica 1140 / - kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Altre Estrusioni
Forma fisica disponibile
Pellet
Resistenza Chimica
Resistenza all’olio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.