Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® i4 3DF - PEEK - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® i4 3DF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 12 / * cm³/10min ISO 1133
Temperatura 380 / * °C -
Carico 5 / * kg -
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 3500 / - MPa ISO 527
Resistenza a trazione 94 / - MPa ISO 527
Carico unitario a trazione 94 / - MPa ISO 527
Deformazione a snervamento 5 / - % ISO 527
Carico unitario a rottura 76 / - MPa ISO 527
Resistenza all'urto Charpy, +23°C N / - kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C N / - kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 6 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Resist. urto Charpy con intaglio, -30°C 9.1 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 338 / * °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min 152 / * °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 150 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 205 / * °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 335 / * °C ISO 306
Temp.di rammollimento Vicat, B 305 / * °C ISO 306
Reazione al fuoco a spessore h V-0 / * class IEC 60695-11-10
Spessore provato 3.2 / * mm -
ASTM Data
Temperatura di fusione 338 °C ASTM D 3418
Altre Proprietàsecco/condUnitáNorma del test
Massa volumica 1300 / - kg/m³ ISO 1183
Densità 1300 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Additive Manufacturing
Forma fisica disponibile
Monofilament, Colore naturale
Caratteristiche speciali
Stabilizzato o stabile al calore
Caratteristiche
Stabilità termica
Resistenza Chimica
Resistenza all'acido, Resistenza agli alcali, Resistenza chimica generale, Resistenza ai solventi, Resistenza al grasso, Stabilità idrolitica , Resistenza all’olio
Certifications
Grado medico, Biocompatibility ISO 10993, Approvazione della USP class VI
Applicazioni
Medicale
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.