Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SKYPEL G940DW - TPE - SK Chemicals

Material Data Center offers the following functions for SKYPEL G940DW:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Skypel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Raccomandazione de Processabilità Stampaggio ad Iniezione - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 13 g/10min ASTM D 1238
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Durezza D Shore 40 - ASTM D 2240
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
Temperatura di fusione 157 °C ASTM D 3418
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Temperatura dello stampo 25 °C -
Zona 1 165 °C -
Zona 2 175 °C -
Zona 3 175 °C -
Temperatura dell ugello 180 °C -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Temperatura di fusione 170 °C -
Zona 1 150 °C -
Zona 2 160 °C -
Zona 3 165 °C -
Temperatura dell ugello 165 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione fibra , Estrusione di tubi, Estrusione di Lastre/Fogli, Estrusione cavi, Altre Estrusioni
Caratteristiche speciali
Stabilizzato o stabile al calore
Caratteristiche
Stabilità del colore, Resistenza alla fatica, Buona adesione, Stabilità termica
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.