Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of PULSE™ 6000 BG - (PC+ABS) - Trinseo

Material Data Center offers the following functions for PULSE™ 6000 BG:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Pulse datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 6 g/10min ISO 1133
Temperatura 260 °C -
Carico 5 kg -
ASTM Data
Indice di fluidità a caldo, MFI 6 g/10min ASTM D 1238
Temperatura 260 °C -
Carico 5 kg -
Ritiro di stampaggio, parallelo 0.0055 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2280 MPa ISO 527
Carico unitario a trazione 54 MPa ISO 527
Deformazione a snervamento 5 % ISO 527
Carico unitario a rottura 53 MPa ISO 527
Deformazione a rottura >50 % ISO 527
Modulo a flessione, 23°C 2400 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 61 kJ/m² ISO 179/1eA
Resistenza all'urto Izod con intaglio, +23°C 69 kJ/m² ISO 180/1A
Resistenza all'urto Izod con intaglio 61 kJ/m² ISO 180/1A
Temperatura -40 °C -
ASTM Data
Modulo a trazione 2158 MPa ASTM D 638
Resistenza alla trazione di snervamento 51 MPa ASTM D 638
Resistenza alla trazione a rottura 54.5 MPa ASTM D 638
Allungamento a snervamento 5 % ASTM D 638
Allungamento a rottura 80 % ASTM D 638
Resistenza all'urto Izod con intaglio, 1/8 in 747 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 641 J/m ASTM D 256
Temperatura -40 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 110 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 144 °C ISO 306
Temp.di rammollimento Vicat, B 130 °C ISO 306
ASTM Data
coefficiente d’espansione termica, lung. 73.8 E-6/K ASTM D 696
DTUL a 264 psi 111 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1130 kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 0.53 % ASTM D 570
Densità 1130 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Soffiaggio
Caratteristiche speciali
Alto urto o modificato all'urto, Stabilizzato o stabile al calore
Caratteristiche
Resistenza del fuso
Applicazioni
Automotive
Disponibilità geografica
Nord America, Europa, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.