Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Polylan ABS 3O 42 - ABS - Polyma Kunststoff GmbH & Co.KG
Material Data Center offers the following functions for Polylan ABS 3O 42 :
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Polylan datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
| Caratteristiche Fisiche | Valore | Unitá | Norma del test |
| Other Standards[S] |
| Indice di Fluiditá, MFI |
20 |
g/10min |
DIN 53735 |
| Temperatura |
220 |
°C |
- |
| Carico |
10 |
kg |
- |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| Proprietà Meccaniche | Valore | Unitá | Norma del test |
| ISO Data |
| Resist. urto Charpy con intaglio, +23°C |
10 |
kJ/m² |
ISO 179/1eA |
| Resistenza all'urto Izod con intaglio, +23°C |
17 |
kJ/m² |
ISO 180/1A |
| Other Standards[S] |
| Modulo a trazione |
2300 |
MPa |
DIN 53457 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| Proprietà Termiche | Valore | Unitá | Norma del test |
| Other Standards[S] |
| Temp.di rammollimento Vicat, B |
95 |
°C |
DIN 53460 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| Altre Proprietà | Valore | Unitá | Norma del test |
| Other Standards[S] |
| Massa volumica |
1060 |
kg/m³ |
DIN 53479 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
Caratteristiche
Forma fisica disponibile
Nero
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
