Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Platamid® HX 2667 Powder - PA* - ARKEMA

Material Data Center offers the following functions for Platamid® HX 2667 Powder:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Platamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Platamid® HX 2667 Powder
Copolyamide Hot Melt Adhesive / Textile Applications

Platamid® HX 2667 Powder is a medium melt viscosity copolyamide adhesive powder for the production of fusible interlinings.

Platamid® HX 2667 Powder offers excellent laundry resistance up to 60°C and an excellent resistance to all kind of steam treatment.



AVAILABLE GRADES
This grade is available in different grain sizes:
- Platamid® HX 2667 PA80 (0-80 µm paste dot)
- Platamid® HX 2667 PTA 170/20 (0-170 µm power dot)
- Platamid® HX 2667 PTA 170 (80-170 µm double dot)
PACKAGING
- Platamid® HX 2667 PA80 and Platamid® HX 2667 PTA 170/20 are delivered in 20 kg sealed bags.
- Platamid® HX 2667 PTA 170 is delivered in 20 kg sealed bags.
SHELF LIFE
Two years from the date of delivery. For any use above this limit, please refer to our technical services.
RENEWABLE CARBON CONTENT
60% (calculated, ASTM D6866)
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 30 / * cm³/10min ISO 1133
Temperatura 160 / * °C -
Carico 2.16 / * kg -
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 128 / * °C ISO 11357-1/-3
Altre ProprietàValoreUnitáNorma del test
Biobased content 60 % -
Caratteristiche
Forma fisica disponibile
Polveri
Caratteristiche
Copolimero
Certifications
Contiene risorse rinnovabili
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.