Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of IROGRAN® A 95 P 5044 DP - TPU - Huntsman Polymers Corp.

Material Data Center offers the following functions for IROGRAN® A 95 P 5044 DP:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Irogran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.7 % ISO 294-4, 2577
ASTM Data
Ritiro di stampaggio, parallelo 0.007 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Deformazione residua dopo compressione a 23°C, 24h 29 % ISO 815
Deformazione residua dopo compressione a 70°C, 24h 82 % ISO 815
Resistenza alla lacerazione 115 kN/m ISO 34-1
Resistenza all'abrasione 30 mm³ ISO 4649
ASTM Data
Modulo a 100% allungamento 11 MPa ASTM D 412
Modulo a 300% allungamento 27.6 MPa ASTM D 412
Durezza A Shore 95 - ASTM D 2240
Durezza D Shore 52 - ASTM D 2240
Resistenza alla lacerazione 105 kN/m ASTM D 624
Compressione residua, 22 hr @ 158 °F 82 % ASTM D 395
Resistenza alla trazione 55.2 MPa ASTM D 412
Allungamento a rottura 470 % ASTM D 412
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1140 kg/m³ ISO 1183
Densità 1140 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Trasparente
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.